產品介紹

毒氣氣體偵測器 HONEYWELL(Honeywell) GAS DETECTOR

MST Satellite XT (Satellite Portable Gas Detector /MST Satellite PGD)

MST Satellite XT (Satellite Portable Gas Detector /MST Satellite PGD)

The MST Satellite XT is the simple solution for all "Point-of-Use" gas detection needs. Based upon the markets smallest and most reliable electrochemical cell technology, the MST Satellite XT offers the flexibility, simplicity and application ease.

The MST Satellite XT can be purchased in either an analog or digital configuration allowing it to interface with new or existing facility control technologies. The digital MST Satellite XT is built on LonWorks® technology. Life Safety Systems built on a LonWorks® network platform allow users to leverage the cost efficiencies of distributed controls, while maintaining the integrity and reliability necessary for code compliant safety applications.

MIDAS氣體偵測器

MIDAS氣體偵測器 HONEYWELL Midas (Midas Sensor Cartridge )

MIDAS氣體偵測器用於半導體行業,對該行業生產過程中的氣體洩漏做出快速且可靠的反應。MIDAS氣體偵測器有更長感測器校準週期、靈活的通信方式以及獲得專利的診斷功能,流量控制特點,這些特點降低了儀器使用成本並提高了儀器的使用效能。 MIDAS氣體偵測器是一個通用的變送器平臺,能夠探測出大多數的必須在Fab中監測的毒氣、周圍環境的氣體和易燃的氣體。預校準的"即插即用"智慧感測器使感測器的更換不需要工具並且快速便捷,從而防止了操作員工因使用不正確的或已耗盡的感測器造成的誤差。明亮的發光二極體燈與直觀的使用圖示的人機互動式功能表與受到密碼保護的配置、測試及校準功能表配套使用使對氣體的讀取或警報級別的緊急警戒有了保證。

Sensepoint XCD GAS DETECTOR XCD transmitter

Sensepoint XCD GAS DETECTOR XCD transmitter

Flammable, toxic and oxygen gas detector for industrial applications

Sensepoint XCD offers excellent flexibility and is suited to a wide range of industrial applications. The device can detect flammable, toxic or Oxygen gases in a 3-wire 4-20mA format with relay outputs. This wiring configuration makes the Sensepoint XCD ideal for retrofitting other older generations of Honeywell Analytics gas detectors including the 1050 series, Series 2000 Flammable, the Sensepoint Pro as well as many other models.

Sensepoint XCD 氣體探測器是一種固定安裝在易燃、易爆或有毒氣體場所,用來檢測空氣中可燃性氣體、毒氣及氧氣濃度的儀器。XCD(意為Exceed 超越)氣體探測器將氣體檢測技術的所有優點集於一身,是已被廣泛應用的固定式氣體探測器的更新換代產品,其性價比遠超現有任何同類產品。

E3Point

E3Point

E3Point is a toxic/combustible gas monitor that makes a commercial operation run more intelligently to protect people, property and the bottom line. It goes beyond protection to increase energy management, efficiency and economical value.

Manning EC-F9

Manning EC-F9

Industry leading performance in Ammonia detection technology.

301C

301C

The 301C continuously monitors and controls toxic gases, combustible gases, and Oxygen hazards. Designed for installation and operational simplicity, the VA301C reduces the cost of installation and ownership.

Manning AirScan™ iR

Manning AirScan™ iR

Diffusion design sensor that allows all points of detection to be monitored continuously.

ECF9NH3_ECF3.

ECF9NH3_ECF3

A galvanic cell type Oxygen sensor that exhibits exceptionally long life plus excellent chemical durability.

Manning Air Alert 96d .

Manning Air Alert 96d

Acts as the nerve center of a modular gas detection network by providing continuous monitoring of up to 96 sensors

Manning GM-JR .

Manning GM-JR

The GM-JR is an innovative stand-alone or "signal feed-through" readout/alarm unit that can be configured in a variety of ways to solve many refrigeration-gas concentration and alarm needs at an affordable price. The readout provides a calibrated 20-segment LED bargraph, alarm and fault LEDs, plus a relay output with easy trip point adjustment.

301EM .

301EM

The 301EM Expansion Module acts as a controller for up to four remote refrigerant sensors and suits a variety of gas detection system solutions.

Manning VL .

Manning VL

Continuously monitor for potential leaks in the vent lines of refrigeration systems.

Impact / Impact Pro Multi-Gas Detectors.

Impact / Impact Pro Multi-Gas Detectors

Market leading, very flexible portable gas detector, capable of monitoring 4 gases at once.

MultiPro Multi-Gas Detector.

MultiPro Multi-Gas Detector

The MultiPro multi-gas detector monitors up to four confined space gases simultaneously, in real-time. It offers one button operation and calibration, an easy-to-read LCD display, audible and visual alarms and event logger. The rugged, compact, economical MultiPro comes with an optional sample draw pump. As part of the IQ Management System, the automated IQ Express™ docking station saves on calibration gas costs, automates your record keeping, and ensures your instrument is working to specifications

ToxiPro Single Gas Detector .

ToxiPro Single Gas Detector

You should never compromise on safety. The field replaceable ToxiPro® single-gas detector has three visual alarm windows that come standard with both high visibility yellow (warning) and red (danger) alarm LEDs that flash and chase. New enhancements for the IQ Management System provide automated email alerts so you and your entire group are in control by knowing instantly what alarms are occurring and more specifically, with customizable settings, only the alarms that are important to you. You can now be assured that during an incident you will know who was wearing the monitor, what work area they were in, when the event took place and what type of alarm event they experienced. Incident investigation time is now reduced with more detailed information about the alarm.

XNX Universal Gas Transmitter .

XNX Universal Gas Transmitter

Supports the widest range of sensors on a common platform and offers a modular choice of inputs and outputs, saving customers time and money on wiring and material costs, installation, maintenance and operation.

其他偵測器

其他偵測器

居家型一氧化碳偵測器 SF-450EN Honeywell SF450EN Carbon Monoxide Alarm

天然氣瓦斯偵測棒 ez-sense Flammable Gas Detector Pen

Fire & Gas Systems

Fire Sentry Fire Sentry SS2 UV/IR Flame Detector Fire Sentry SS2.

Fire Sentry Fire Sentry SS2 UV/IR Flame Detector Fire Sentry SS2

The Fire Sentry SS2 represents the world’s pre-eminent UV/IR technology for Electro-Optical Flame Detectors with thousands successfully operating in a multitude of installations worldwide. These Multi-Spectrum detectors sense radiant energy in the ultraviolet (UV), visible and WideBand Infrared™ (IR) spectrum. The radiant energy from all types of flaming fires will alert the detectors to their presence.


Feature

  • Multi-Spectrum senses energy in the UV, Vis and WideBand IR™
  • False alarm immunity
  • Detects hydrocarbon and non-hydrocarbon fires
  • Microprocessor based algorithms: FirePic™ and Tri-Mode Plot™
  • Wide field of view and solar blind
  • Wide temperature range of operation
  • Explosion-proof housing
  • FS2000™ System compatible or stand-alone operation
  • Compatible with approved fire alarm panels

FireSentry SS4.

FireSentry SS4

The Fire Sentry SS4 Electro-Optical Digital Fire and Flame Detectors represent leading edge UV and UV/IR technology.

FireSentry SS4-A
The Fire Sentry SS4-A represents the world’s pre-eminent UV/IR technology for Electro-Optical Flame Detectors with tens of thousands successfully operating in a multitude of installations worldwide. This multi-spectrum detector senses radiant energy in the ultraviolet (UV), visible and Wide Band Infrared™ (IR) spectrum. The radiant energy from all types of flaming fires will alert the detector to their presence.

Fire Sentry SS4-AUV Features:
  • Senses solar-blink ultraviolet band
  • Built-in test for optical “through the lens” testing
  • Utilizes long-life, ruggedized UV sensors
  • Detects hydrocarbon and non-hydrocarbon based fires
  • Wide field-of-view and solar-blind
  • Adjustable detector sensitivity
  • Microcomputer based algorithms: FirePic™, Snapshot™ and UV Plot
  • Wide temperature range of operation
  • Compatible with standard approved fire alarm panels
  • Explosion-proof housing
  • Time programmable alarm verification

Fire Sentry FS7 Fire and Flame Detector .

Fire Sentry FS7 Fire and Flame Detector

The Fire Sentry FS7-2173 electro-optical radiant energy fire detector – and the Fire Sentry FS7-2173-2RP (unitized model) with multi-spectral WideBand IR™, Near Band IR and Visible Band fire detection are designed specifically for semiconductor Clean Room fire protection applications.

Fire Sentry FS20X Fire and Flame Detector.

Fire Sentry FS20X Fire and Flame Detector

The Fire Sentry FS20X is the latest generation high technology Multi-Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors. Based on the foundation of the highly successful and reliable Fire Sentry SS4 detector, the Fire Sentry FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The Fire Sentry FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The Fire Sentry FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional

Fire Sentry FS24X Fire & Flame Detector .

Fire Sentry FS24X Fire & Flame Detector

Fire Sentry FS24X is a quantum leap in flame and fire detection with its sophisticated software and detection technology. The Fire Sentry FS24X is the latest generation high technology Multi-Spectrum Triple IR (IR/IR/IR/Visible) Fire and Flame Detector, which is part of our FSX family of advanced technology Electro-Optical fire detectors. Using our patented* WideBand IR™, WideBand 4.3 micron IR™, and Visible detection technology, the Fire Sentry FS24X is a quantum leap in flame and fire detection. Sophisticated software algorithms and dual microprocessors ensure that the Fire Sentry FS24X has the highest fire detection performance combined with optimal false alarm rejection.